Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Chainrings

$29.99 - $32.99
Shimano Ultegra 6800 11-Speed Inner Chainrings - Material: Aluminum - Ring Position/Type: Inner
$92.00 - $132.00
Intense study of chain and chainring wear patterns led to the radical tooth profile that lasts longer, runs quieter and further improves chain retention. - Can be used with Eagle 12 speed or SRAM 11 speed chains - Direct mount rings with 3mm offset fit Boost geometry Eagle cranks; direct mount rings with 6mm offset fit traditional geometry Eagle cranks and GXP spindle XX1, X01, X0, X1 and X9 cranks
$230.00
Replacement chainrings in 110mm and 130mm BCD for SRAM 11-speed Yaw speed road cranks. Replace worn out rings or swap to change gearing for specific uses.
$56.99
The Shimano R9100 series crankset achieves the ultimate in optimal power transfer. It does this through a reinforced chainring on its unique asymmetrical four-arm spider construction. - Chainring BCD: 110 Shimano Asymmetric - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner
$61.00 - $155.00
Eagle Technology creates the smoothest, quietest, longest-lasting, and most efficient drivetrains we've ever made. The radical new look and feel of our X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the new Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. - X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise. - Designed to be used with Eagle chain - Non-Boost 6mm offset
$186.00
Designed for use with SRAM's XX SL Eagle power meter, these Thread Mount replacement rings are purpose made for use with the XX SL proprietary spider design. This chainring mount system allows reduced weight without compromising reliability. - Proprietary Thread-Mount design specifically for use with XX SL Power Meter spiders - Light weight and incredibly durable aluminum chainring - Compatible with SRAM T-Type chains - SRAM Threaded chainring tool required for installation (Sold separately - TL0190)
$17.00 - $39.99
64BCD chainring for MTB cranksets
$136.40
Full Speed Ahead chainrings have powered multiple World, Tour de France, and Olympic champions, and will exceed your expectations. - Chainring can be used with FSA SL-K 90 BCD inner chainrings - Precision CNC-machined AL7075/T6 - Shifting ramps and stainless steel pins on outer rings - Laser-etched logo - Compatible with FSA Modular crankset (Gossamer / Energy / SL-K / K-FORCE) - Drivetrain Compatibility: Shimano 10/11-speed, SRAM 10/11-speed, FSA 11-speed, Campy 10-speed
$159.99
- Shimano, Tiagra FC-4703, Chainring, Teeth: 50, Speed: 10, BCD: 110, Bolts: 4, Outer, Aluminum, Grey, Y1RD98030
$26.49
Shimano Sora 9-Speed replacement chainrings gets your drivetrain operating smoothly again.
$14.00 - $31.00
Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.
$78.99
Shimano, GRX FC-RX600 2x10 / 2x11, Chainring, Teeth: 30, Speed: 10/11, BCD: 80, Bolts: 4, Inner, Aluminum, Black
$144.99
- Shimano, Tiagra FC-4700, Chainring, Teeth: 50, Speed: 10, BCD: 110, Bolts: 4, Outer, Aluminum, Grey, Y1RC98050
$155.00
Rugged durability comes naturally to the XX Eagle T-Type direct mount chainring. Finished with a distinct, dual-spoke design your shifting will never be compromised. - 3mm offset - Light weight and incredibly durable aluminum chainring - 8-bolt direct mount design (Mounting bolts included) - Compatible with SRAM T-Type chains
$186.00
Rugged durability comes naturally to the XX SL Eagle T-Type direct mount chainring. Finished with a distinct, dual-spoke design your shifting will never be compromised. - Light weight and incredibly durable aluminum chainring - 8-bolt direct mount design (Mounting bolts included) - Compatible with SRAM T-Type chains
$155.00
Designed specifically for use e-mtb drive systems, SRAM’s XX T-Type direct-mount rings offer light weight with optimal retention performance needed for e-mtb. - Steel and Aluminum construction
$59.99 - $94.99
RaceFace Narrow Wide Chainrings feature tooth profiling for chain retention and a blend of weight and durability suitable for XC, DH, and everything in-between. - 7075-T6 aluminum, aerospace grade strength - Compatible with 9, 10, 11 and 12 speed - Stiff 4mm plate thickness and I-beam construction transfer loads without flexing - Reversible laser etched graphics - Non-threaded bolt holes
$339.99
- 10 and 11 speed compatible chainrings - Design and rigidity adapted to ZED 3 cranksets - Ultra light chainrings - Fluid, fast and accurate gear changes - Use chainring pairs for perfect compatibility
$79.70
- Precision CNC-machined AL7075/T6 - Shifting ramps and stainless steel pins on outer rings - Laser-etched logo - Crankset Compatibility: Gossamer ABS 2019
$138.00 - $147.00
SRAM's X-Sync 11-speed chainring features tall teeth with an alternating tooth profile to hold the chain amazingly well and still provide space for mud to clear. - Drivetrain Speeds: 10, 11 - Material: Aluminum - Ring Position/Type: Chain Retaining Single Ring
$24.99
- Shimano, 32T, 9 sp, BCD 104mm, 4-Bolt, FC-M430-9, Middle Chainring, For MTB triple, Steel, Silver, Y1M098060
$129.95
These chainrings are for Shimano direct mount cranks. The Wolf Tooth chainrings feature our patented Drop-Stop® design for the best wear life, chain retention, and mud clearance. Compatibility: - Shimano XTR M9100, XT M8100, SLX M7100, and Deore M6100 series 12 speed cranksets. - Our chainring offset matches the offset of Shimano chainrings to replicate the intended chainline for the crankset. - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP ST - Compatible with 12spd Shimano Hyperglide+ chain and 12spd KMC chain only - Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 32t/66g | 34t/72g | 38t/81g - Material: 7075-T6 aluminum - Made in the USA
$124.95
"More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you’ll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body’s natural biomechanics. Here’s how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what’s known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you’re climbing. We’ve also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch chainrings feature our patented Drop-Stop® tooth profiles for the best wear life, chain retention and mud clearance. We have optimized tooth profiles for SRAM T-Type Transmission, Shimano Hyperglide+, and all 12, 11, 10, and 9-speed chains. Compatibility - Any Race Face Cinch™ system crankset (including Next SL, Sixc, Turbine, Aeffect) - Riders running SRAM Transmission w/ Race Face Cinch cranksets with a Boost 136/137mm spindle use a Cinch direct mount 0mm offset chainring. - Riders using a Cinch crankset with a Super Boost 151mm spindle use a Cinch direct mount 3mm offset chainring. - Standard (142mm rear hub spacing) 6mm offset, Boost (148mm hub spacing) 3mm offset, and Boost for T-Type Transmission 55mm chainline 0mm offset are available. - Use a 3mm offset chainring for Super Boost applications running standard drivetrains or Transmission. - Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) --- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). - Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!) - Chainline 49mm (standard), 52mm (Boost), 55mm (T-Type Boost) - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! Without these precautions, you may experience chaindrops and/or chainsuck."
$139.95 - $147.95
Wolf Tooth was first to market with cyclocross 1x specific chainrings because we saw cyclocross as the perfect use for our patent pending Drop-Stop® technology. These beautifully machined 110 BCD asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX / road / gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. - Fits 110 BCD Asymmetric 4-bolt Shimano cranks - Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - Fits 110 BCD asymmetric 4-bolt cranks - All sizes compatible with Dura Ace 9000, Ultegra 6800, 105 5800, RS510, Tiagra 4700 or 4703, Sora R3000 or R3030, and Claris R2000 or R2030 cranks. - 38-50t are compatible with 105 R7000, Ultegra R8000, and Dura-Ace R9100. The 36t chainring is NOT compatible with these cranks. - NOT compatible with Dura-Ace R9200, Ultegra R8100, and 105 R7100 Cranks - Size 42t and larger will work with the Dura Ace 9100 power meter - Mounts in the big ring position of the cranks but is offset inward for perfect chainline. - The stock 2x bolts will not work. You will need our 6mm bolts which are optimized for single ring mounting. - If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention - Chainline 47.5mm - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC Not compatible with 12spd Shimano HG+ chains
$129.95
This is a 96mm BCD chainring for a 1X chainring for XTR M9000 crankset with the proven chain retention of our Drop-Stop® chainring. They fit only the Shimano XTR M9000 and M9020 cranksets (race and trail respectively). They have an asymmetrical 96 mm BCD with built-in threaded standoffs to provide the ideal 1X chainline. - Fits 96 BCD XTR M9000 and M9020 cranksets - Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings fit on the Shimano XTR M9000 and M9020 1x or 2x cranksets - Use only the stock Shimano XTR chainring bolts (M7x.75) - You will not use the stock bolt caps when mounting this ring. The stock bolts will thread into the chainring's standoffs from the outside of the crankset - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention) - Chainline - 49 mm for 30-34T and 50 mm for 36T. Provides a great chainline on most boost bikes - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy DROP-STOP ST - Compatible with 12spd Shimano Hyperglide+ chain and 12spd KMC chain only - Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 30/41g | 32t/50g | 34t/59g | 36t/69g - Material: 7075-T6 aluminum - Made in the USA
$139.95
The Wolf Tooth 107 BCD Chainring for SRAM Cranks is compatible with most new SRAM 1x road cranks that use the 107 BCD spider, including the SRAM AXS Power Meter Spider. This chainring uses the patented Wolf Tooth Drop-Stop B Wide/Narrow tooth profile that is optimized for drop bar bikes. - Fits 107 BCD for SRAM Cranks - Drop-Stop technology prevents dropped chains. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris while reducing friction. - Cranks that use the 107 BCD spider also use the SRAM 8-bolt interface, which is compatible with Wolf Tooth Direct Mount Chainrings for SRAM 8-Bolt More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you'll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body's natural biomechanics. Here's how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what's known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you're climbing. We've also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B - Compatible 9, 10, 11, and 12s SRAM Eagle, 12s SRAM Transmission (T-type) Flattop, 12s Campy, 12s KMC - Not compatible with 12s Shimano HG+ chains Recommendations - - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper (like our GnarWolf) in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. - Recommend the use of a clutch-style rear derailleur for the best chain security. Tech Specs: - Material: 7075-T6 aluminum - Weight: 38t/75g | 40t/78g | 42t/86g - Made in the USA
$155.00
Eagle Technology creates the smoothest, quietest, longest-lasting, and most efficient drivetrains we've ever made. The radical new look and feel of our X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the new Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. - X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise. - Designed to be used with Eagle chain - Boost 3mm offset
$129.95
Looking for a 1X chainring for your new Shimano XT, SLX or Deore crankset with the proven chain retention of our Drop-Stop® chainrings? Wolf Tooth has what you need in the form of a beautifully machined asymmetrical 96 mm BCD that provides the ideal 1X chainline of 49mm. Note - The 28T and 26T sizes will mount to the inner 64 BCD mounting position on these cranksets. Compatibility: - These rings fit on the Shimano XT M8000, SLX M7000, Deore M6000, or FC M5100 1x or 2x cranksets - Not compatible with Deore triple (3x) cranksets - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). - Provide a great chainline on most Boost bikes. See this explanation for details. - Drop-Stop A models will reduce the chainline (inward towards the frame) from the Shimano specified chainline for the crankset: 26T-28T = -3mm, 30T-34T = -2mm, and 36T-38T = -1mm - Drop-Stop ST models will have the same chainline as the Shimano specified chainline - 10mm bolts are optimized for mounting this ring - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy DROP-STOP ST - Compatible with 12spd Shimano Hyperglide+ chain and 12spd KMC chain only - Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 26t/42g | 28t/50g | 30t/41g | 32t/50g | 34t/59g | 36t/69g - Material: 7075-T6 aluminum - Made in the USA
$139.95 - $147.95
Direct mount chainrings for SRAM cranks with 8-bolt mounting replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you'll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body's natural biomechanics. Here's how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what's known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power while behaving like a 32T chainring when you're climbing. We've also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. Compatibility: - These direct mount chainrings will replace your existing chainring and spider or replace the direct mount chainring for SRAM AXS cranksets and other cranks that use the 8-bolt mounting. Most SRAM cranksets have traditionally used a 3-bolt mounting, but the 8-bolt mounting has always been used on the Quarq power meter cranks. Now some non-power meter cranks like SRAM AXS use the 8-bolt mounting. - All SRAM Direct Mount DUB road cranksets use the 8-bolt mounting standard. These cranksets use either 107 BCD or 94 BCD; any of those cranksets with a removable spider use the 8-bolt mount. - Wolf Tooth's patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability - 6mm offset - Chainline 45mm - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B - Compatible 9, 10, 11, and 12s SRAM Eagle, 12s SRAM Transmission (T-type) Flattop, 12s Campy, 12s KMC - Not compatible with 12s Shimano HG+ chains Recommendations - - Recommend the use of a clutch-style rear derailleur for the best chain security - Use the included custom T20 bolts. Torque 4Nm with T20 tool Tech Specs: - Weight: 38T/81g | 40T/87g | 42T/97g | 44T/117g - Material: 7075-T6 aluminum - Made in the USA
$139.95
More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you'll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body's natural biomechanics. Here's how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what's known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you're climbing. We've also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. The direct mount chainrings for SRAM cranksets with the 3 bolt mounting interface. They replace your existing spider and chainring with one clean looking, lightweight, and stiff piece of machined billet. They are available in the Drop-Stop B tooth profile, which is optimized for SRAM Flattop chain. It is also compatible with all other 9, 10, 11, and 12 speed chains except Shimano 12spd chain. Compatibility: - These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that these chainrings are NOT compatible with SRAM 8-bolt direct mount cranksets. - Wolf Tooth's patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability - There is one offset: Standard Road/CX/Gravel: 6mm offset for cyclocross and road crank applications with 47mm chainline - Praxis Works Road/CX cranks use the 6mm offset. - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP B Compatible 9, 10, 11, and 12s SRAM Eagle, 12s SRAM Transmission (T-type) Flattop, 12s Campy, 12s KMC Not compatible with 12s Shimano HG+ chains Recommendations - - Recommend the use of a clutch style rear derailleur for the best chain security. - An L-wrench works best since the crank spindle may contact a socket adapter and prevent it from engaging properly. - Use the same 3 bolts to attach the Wolf Tooth ring or we carry replacement bolts Tech Specs: - Weights: 38t/90g | 40t/96g | 42t/104g - Material: 7075-T6 aluminum - Made in the USA
Page 1 of 4 Next page