Brakes/Levers/Pads

Paceline disc brake rotors incorporate the elegant design of our eTap AXS road groupsets and feature a new brake track vent design for smooth, quiet braking performance. - Designed for road use - Paceline brake track offers quiet brake operation

Meet the new standard for hard-hitting, heavy-duty braking. We added 15% extra piston power and 30% more volume in the lever reservoir, ensuring peak performance for the full run. And with SwingLink and Lever Pivot Bearing technologies, lever feel remains smooth and progressive, no matter how hard the pull. Go deeper and grab more power. - Designed specifically for heavy-duty demands. - Pivot bearing offers crisp lever feel and a fatigue-free ride. - Metallic pads come standard for more power and longer wear.

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

TRP's two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Its two-piece design is now combined with TRP's new slotted rotor design with a 2.3mm thickness for DHR and E-MTB only. When debris gets trapped between the pad and rotor, braking power is dramatically reduced. This rotor's six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking for more consistent braking power and modulation in mixed conditions. - Six slots to remove water, mud, and debris - Two-piece design for heat management and stiffness

With a focus on reduced weight and cross-country tuned stopping power, Shimano SLX M7120 brakes provide intuitive modulation so that you can explore your limits with confidence. The BL-M7100 levers feature an optimized lever axle position, an additional handlebar contact point for greater stiffness, and refined ergonomics for rider comfort. At the caliper end, the BR-M7120 4-piston caliper is optimized for the toughest enduro trails. - 10% stiffer than previous generation M7000, even under high-temp conditions - Quicker brake engagement with shorter free stroke - Tool-free lever reach adjustment - I-SPEC EV Clamp Band enables optional integrated shifter setup - Includes finned metal pads

- High Performance Brake Pads - Disc Pad Material: Organic

Shimano Deore XT RT-MT800 Center Lock disc brake rotors feature an advanced heat-dissipating design. - Rotor construction uses Shimano Freeza technology to boost heat dissipation and reduce fade - Quick and easy installation with spline mount and lock ring (included) - Compatible with metal and resin pads

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Rounded edges are UCI-compliant and allow for easier wheel installs (140mm, 160mm, 180mm, 200mm) - Compatible with both road and mountain bike brakes

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Rounded edges are UCI-compliant and allow for easier wheel installs - Compatible with both road and mountain bike brakes - Includes steel rotor bolts

Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible

Cost effective stopping power from the leader in cable-actuated disc brakes. - All calipers have 74mm mounting bolt spacing - For use with with long cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Includes steel-backed organic pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 215 g

Avid takes entry level to a whole new level with the BB5s, which feature ball bearings (where the BB comes from in the name), a melt-forged body and a CleanSweep rotor for excellent stopping power and awesome durability. Plus, an inboard pad adjustment knob lets you dial in the perfect distance between the rotor and the pads, while Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds. And, the tool-free pad replacement and adjustment makes quick work out of accommodating for pad wear, so you always have positive, powerful braking.

- Aluminum pad holder with R55C4 pads

- Lightweight aluminum spider design improves stability and durability - Durable stainless steel resists corrosion - Compatible with all disc brake pad compounds

Shimano M03 Metal Disc Brake Pads - OEM pad for XT BR-M755 caliper - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability

Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic. The term semi-metallic can also be used. Kool-Stop has found during testing that their disc pads are rotor-friendly and provide high performance braking throughout the life of the pad. - Qty 1 = enough for 1 wheel

The SRAM CenterLine XR (CLX-R) rotor works in tandem with the SRAM eTap AXS drivetrain. It's designed specifically for road riding — and to keep braking quiet at every stop. - Streamlined form optimized for road use - CenterLine track offers quiet brake operation - Two-piece design reduces weight - Includes stainless steel rotor bolts

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

- High performance compounds recommended for all conditions - Steel backing

BAT adjuster dial kit for Magura brakes.

High performance Kevlar, Ceramic, Brass and resin composite material. Provides excellent brake power with minimal effort at the brake lever. Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included with every set (where applicable). Fits: Avid - Juicy 3,5,7,Carbon,Ultimate - BB7 Mechanical

Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.

Shimano compatible road caliper brake pads from Bontrager. Genuine replacement parts Reliable Bontrager stopping power for optimal operation and safety. - Sleek brake pads and cartridges are Shimano compatible - British Standard Compound (BS)—Long wearing pad compound - Exceeds all US standards for brake pads—Sticky rubber for improved braking - Sold in pairs

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

- A mountain bike specific rotor designed to improve brake performance while reducing noise and increasing heat dissipation - New brake track pattern for increased pad traction and recessed spokes with thermal dissipating paint - HS2 is more powerful, and quieter rotor with best-in-class heat management

- New resin pads have 50% more durability! - Pair of L-Type brake pads with fins, for one caliper - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade, especially in long descents - Resin compound, for improved modulation & lower noise - Longer lasting than K-Type pads - Interchangeable with K-type finless pads - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - NOT compatible with XTR BR-M9100

- Attachment parts for Magura OEM and braided-stainless hydraulic disc and rim brake tubing

This simple repair part is vital for getting bikes with side-pull caliper brakes safely back on the road. - 6mm size

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

- Shimano, BR-M575, E01S, Metal disc brake pads, pair, E-type, Y8FL98010

- Pair of G-Type disc brake pads without fins, for 1 caliper - Resin Compound - Available with Steel backplate for lower cost or Aluminum backplate for superior heat management - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Interchangeable with F-Type and J-Type pads - Includes spring and pin

- Pair of K-Type disc brake pads without fins, for one caliper - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Steel backplate for lower cost or Ti backplate for improved heat management and lower weight - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - Also compatible with XTR BR-M9100 calipers - Interchangeable with L-type finned pads (except for XTR BR-M9100)

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

- Pair of G-Type disc brake pads without fins, for 1 caliper - Resin or Metallic brake compound - Available with Steel backplate for lower cost or Aluminum backplate for superior heat management - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Interchangeable with F-Type and J-Type pads - Includes spring and pin

The secret to great fun on any ride is confident and secure braking. Letting it rip where you want, knowing that you can stop when you want. Enter the Apex 1 HYDROR. Using SRAM's proven HYDROR braking system, the Apex 1 delivers quiet confidence on every ride. - Uses DOT 5.1 brake fluid - Lever body design offers excellent finger wrap, comfort, and control - Forged aluminum disc caliper with steel-backed organic pads and steel hardware - Two piston hydraulic caliper - Moto-style means this is a left-side lever with a rear brake, the reverse of the normal American-style. - Front brake hose length is 950mm, rear brake hose length is 1800mm

- Compound designed considering the higher weight and faster speed of E-bikes - Tuned for power, durability, and low noise

The SwissStop Disc RS brake pad set offers a highly balanced combination of brake performance, durability and incredibly low noise in all conditions. - Delivers a smooth feel in the brake lever with predictable and progressive brake power - Provides extremely quiet operation in all environments - Features an organic compound that offers smooth modulation and is rotor-friendly - At 1.6mm thick the steel backplate saves weight over standard designs, yet provides the preferred thermal characteristics, strength and stability of steel - Compatible with SRAM Code R (2018+), RSC (2018+), Guide RE; Avid Code (2011-2014), Code R - Pad Shape Number: 36 - Designed for ebike: Yes - Backing Plate Material: Steel - Compound: Organic

- High quality, durable stainless steel machined braking surface ensures consistent stopping power and resists corrosion - Reinforced rotor design improves stability and resists warping - Compatible with all sintered, semi-metallic, and organic/resin disc brake pad compounds

- Agressive sintered compound - Perfect for wet conditions or for DH rigs - Replacement springs or clips included where required

Compatible with cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability.

Jagwire's Road Pro Brake Pads fit Campagnolo, Shimano and SRAM sidepull brakes. They feature Jagwire's tried-and-true Pro Series compound for excellent braking and durability. The pads are cartridge-style for easy pad replacement without losing your brake shoe position. And there are wheel guides on the shoes to help when you're putting a wheel back on.

These disc brake pads fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance. - Low noise, high performance semi-metallic compound lasts longer than resin - Steel backing plate

Characteristics: High performance compound for alloy wheels. Improved power and modulation with excellent wet weather stopping power. Design: - low profile shape - each Flash EVO pad is 0.75mm narrower then a FlashPro pad for a total of 1.5mm more clearance for wide rims - 4 asymmetric cut outs - direct mount caliper compatible Fits: - SRAM Road - Shimano Road - CAMPA Potenza 2016 - CAMPA Athena 2016 - CAMPA Veloce 2016

- Optimum heat dissipation - High durabilty - Wear indicators - 1.95mm thick - Rounded edge - UCI approved

Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.

- Replacement barrel adjuster for FR5 and SD7 levers - Includes one pair

G2 RSC is the half-ton pickup truck of the mountain bike brake world—dependable, go anywhere, do anything, plenty of power when you need it, and all of the features you need. The new G2 RSC is based on the SRAM Code design, so it puts Code-like power and modulation into a mini-Code package. And, of course, the signature Guide lever-feel and contact-point adjustability ensures that this brake works great for every rider. The G2 RSC presents a rider-oriented offering with an alloy blade, lever pivot bushings, stainless steel hardware. - Useful reach and contact point adjustments for every type of rider. We design our brakes to give each individual rider distinct control of their ride. - We added stiffness in the caliper and a new pad compound that offers more bite to really deliver the Mini-Code feel. - Engineered for easy installation

For the Ultimate, we held nothing back. Our engineers sculpted the finest materials—titanium and carbon fiber—to make this our lightest four-piston brake ever. Power, modulation, and lever feel set a new standard. Personalization is quick and intuitive. And, for performance—well, our test riders didn't dub it the "Mini-Code" for nothing. - More caliper stiffness and a new pad compound with bite - Pivot bearings for crisp lever feel and a fatigue-free ride - SRAM's best power-to-weight ratio in a four-piston brake

- Disc brake caliber assembly - Assembled - No hose - Code R B1/RSC A1

SRAM's Red Pad & Holder includes SwissStop pads for excellent braking. The holder design makes it easy to switch pads—meaning this system is great for road and cyclocross bikes alike!

SRAM's Force CX1 Hydraulic Brake and Brake Lever is descended from their top-end RED road group, representing SRAM's attempt at perfecting the interface between cyclocross rider and bike, and maximizing braking performance. Designed for a 1 x 11-speed setup, this left-side, hydraulic-brake-only carbon lever is simple and effective. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust.

SRAM's Force 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group and offer precision braking and shifting performance. A carbon brake lever with an aluminum shift lever delivers precise modulation and shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. SRAM Force 22 is designed to work with 11-speed cassettes. The forged aluminum disc caliper itself is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races or epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Force 22 Hydraulics, you'll never go back to rim brakes again!

SRAM's left-side Rival 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group and offer precise braking and shifting performance. The aluminum brake lever and shift paddle deliver smooth modulation and deft shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. The forged aluminum disc caliper is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races and epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Rival 22 Hydraulics, you'll never go back to rim brakes again! - Hydraulic Fluid Type: DOT - Hydraulic Hose Length: 950 mm - Pad Compound: Organic - Rear Der/Shifter Compatibility: SRAM Exact Actuation - Rotor Included: No

The Rival 1 hydraulic disc brake offers optimized stopping power and modulation for road or cyclocross. Pair with a Rival 11-speed shifter for a 1x set-up, or use as a pair for a singlespeed HRD bike. The brake lever features the HydroR brake platform, with revised ergonomics for better finger wrap. Enjoy seemingly effortless braking regardless of terrain or condition. - Individual Reach Adjust - Forged aluminum disc caliper with steel-backed organic pads and steel hardware - Low hand force required - Fully sealed system for no contamination - Easy bleed access

Heavyweight performance in a lightweight package. Level TL packs the same XC and trail-optimized power delivery into a brake set that won’t break the bank. This brake matches an alloy DirectLink lever to a lever body that contains the same technology found in the Level TLM, Level Ultimate and Guide series of brakes, for reliability and consistency you can count on.

Level T capitalizes on the same trail-taming brake technology that conquered the 2015 World Mountain Bike Championships, to deliver a powerful and consistent XC and trail-optimized brake set that keeps your capital in the bank. This budget-minded, MatchMaker-compatible brake set provides all the power of its siblings, keeping you in complete control.

The Rival 1 hydraulic disc brake offers optimized stopping power and modulation for road or cyclocross. Pair with a Rival 11-speed shifter for a 1x set-up, or use as a pair for a singlespeed HRD bike. The brake lever features the HydroR brake platform with revised ergonomics for better finger wrap. Enjoy seemingly effortless braking regardless of terrain or condition. - Individual Reach Adjust - Forged aluminum disc caliper with steel-backed organic pads and steel hardware - Low hand force required - Fully sealed system for no contamination - Easy bleed access - Left-side lever

Level Ultimate is the master of two forces—power and weight—in one sleek, durable design. In this build, we took every gram to task. Carbon-fiber lever blades for crisp, clean pulls. A new two-piece, two-piston caliper for superior heat management and smooth piston actuation. With Ultimate, total control is at your fingertips. - Modern XC power for today's most demanding races - Pivot bearings offer crisp lever feel and a fatigue-free ride - Engineered for easy installation and maintenance